Hover to view detail

Build Salt Wall

Himalayan Pink Salt Bricks 8" x 4" x 2" - Pack of 200

Name: Himalayan Pink Salt Bricks 8" x 4" x 2" - Pack of 200
SKU: BSW-SB-200
Price: 1100.0 USD
Availability: InStock

Ten columns and twenty rows create an 80 × 80 inch face when the broad sides are exposed. This square is a layout example for a substantial interior feature, not a structural wall design. The order can also become four fifty-brick panels across a hospitality or residential project. Decide on the division early, and coordinate support and handling for the weight assigned to each finished location.

• SKU: BSW-SB-200

$1,100.00 ~~$1,360.00~~ Save 19%

In stock • Ready to ship

Authentic Himalayan salt

Natural material with unique tone and veining

Project-focused support

Helpful guidance for homeowners and professionals

Secure checkout

Protected payment experience through Shopify

Bulk quantities available

For walls, spas, saunas and commercial projects

Contractor Bulk Pack

Pack of 200 Himalayan Pink Salt Bricks – 8″ × 4″ × 2″

Develop a large square salt-brick feature or coordinate four smaller panels from a two-hundred-piece order.

Product Specifications

Quantity	200 salt bricks
Dimensions per Brick	8″ × 4″ × 2″
Weight per Brick	~5.5 lbs
Combined Brick Weight	Approximately 1,100 lbs
Nominal Face Coverage	6,400 sq. in. / 44.44 sq. ft.
Example Layout	10 cols × 20 rows: 80″ wide × 80″ high
Material	100% Natural Himalayan rock salt
Origin	Khewra Salt Mine, Pakistan
Color Shades	Natural pink, coral, & amber variations
Intended Use	Dry, protected interior decorative features
Adhesive	Sold separately

Product Benefits

Large Square Composition

The 80 × 80 inch layout establishes an expansive, symmetrical starting geometry.

Four-Panel Distribution

Assign fifty bricks to each of four coordinated architectural niches or rooms.

Bricks-Only Procurement

Keep bonding and anchor specifications aligned with project engineering drawings.

Broad Mineral Surface

Incorporate natural striations and tones intentionally across a major room elevation.

Lighting Design Scope

Plan multi-channel illumination runs before installing heavy permanent backing.

Countable Installation Rows

Organize staging efficiently into twenty neat tiers of ten blocks each.

Calculated Material Area

Base bulk estimates accurately on approximately 44.44 sq. ft. of nominal face coverage.

Phased Placement Option

Separate delivery into labeled batches to facilitate methodical on-site installation.

Ten columns and twenty rows create an 80 × 80 inch face when the broad sides are exposed. This square is a layout example for a substantial interior feature, not a self-supporting structural wall design. The order can also become four fifty-brick panels across a hospitality or residential project. Decide on the division early, and coordinate structural backing and freight staging for the weight assigned to each finished location.

Face Area Calculation: 200 × 8″ × 4″ ÷ 144 = 44.44 sq. ft. (assuming the 8″ × 4″ broad face is exposed). Layout dimensions exclude joints and framing; allow separately for cuts, waste margin, and perimeter trims.

For the bonding stage, select a specialized salt brick adhesive (sold separately) and confirm its instructions against your planned substrate.

Hotel Main Feature

Mount an impressive 80 × 80 inch grand statement square on a reinforced hospitality lobby wall.

Dry-Sauna Feature Group

Allocate 200 bricks among custom dry sauna elevations engineered for high thermal conditions.

Wellness Center Reception

Construct a sweeping illuminated rock salt backdrop within a public commercial spa atrium.

Salt-Room Panel Series

Distribute fifty bricks each to four dedicated accent recesses within a therapeutic salt room build.

Home Architectural Wall

Build a full floor-to-ceiling focal zone in an executive residential wellness wing or wine cellar.

Office Multi-Room Project

Assign targeted palletized quantities across executive lounges, conference rooms, and hallways.

Note: These are alternative decorative applications for the 200-brick quantity, not six installations supplied by one pack. Sauna environments require approved structural anchors, non-corrosive frames, and LED thermal management.

Measure

Verify elevations, dead-weight wall ratings, and perimeter frame clearances before uncrating.

Dry Fit

Pre-sort the twenty rows in labeled sections to manage organic crystal color distribution smoothly.

Prepare Base

Ensure reinforced structural backing engineered to bear approximately 1,100 lbs of salt dead weight.

Backlight

Route lighting channels, driver junctions, and dedicated service hatches alongside the frame.

Maintain clean, dry warehouse or site storage for the two hundred pieces and use rated material-handling equipment.

Keep all 200 bricks away from direct water contact, wet cleaning, and persistent dampness.
Remove dust from finished salt surfaces with a soft, dry cloth; avoid soaking or liquid detergents.
Check the structural anchors and nearby moisture sources periodically for this large-scale interior feature.

How can two hundred bricks make a square?

Ten columns of 8-inch bricks and twenty rows of 4-inch bricks create an exact 80″ wide × 80″ high (approx. 6.7 ft × 6.7 ft) symmetrical square face before joint spacing.

Is the calculated area forty square feet?

No. Two hundred 32-square-inch faces equal 6,400 square inches, which calculates to exactly 44.44 sq. ft. of broad-face coverage. The final installed footprint will adjust based on framing, joints, and cuts.

Can I make four equal panels from this order?

Yes. Dividing the shipment into four equal groups of 50 bricks provides approximately 11.11 sq. ft. per panel (such as four 40 × 40 inch squares or four 80 × 20 inch bands).

Is a salt-brick feature a load-bearing wall?

No. These bricks are for decorative cladding and architectural infill. Structural framework must independently carry the ~1,100 lbs of salt weight plus all bonding and framing materials.

Shipping & Delivery

Orders are typically prepared for shipment within 0–1 business day.

U.S. delivery: Typically 3–5 business days after shipment.
Canada delivery: Typically 3–5 business days after shipment; customs processing may require additional time.
Tracking information is emailed once your order ships.
Large or bulk orders may ship via freight.
Orders containing multiple items may arrive in separate shipments.

Shipping rates and available delivery methods are calculated at checkout.

View our full Shipping Policy for complete details.

Returns & Refunds

Returns may be requested within 30 days of purchase.

To be eligible for a return, items must be unused, in their original condition and packaging, and accompanied by proof of purchase.

Return shipping costs are the customer's responsibility and are non-refundable.
Once your return is received and inspected, approved refunds are processed within 24–48 hours on our end. Your bank or payment provider may require additional processing time.
Defective or damaged items may be eligible for replacement.

For return assistance, contact sale@buildsaltwall.com.

View our full Refund & Return Policy for complete details.