Himalayan Salt Bricks 8" x 4" x 2" Pack of 500 With 17 Salt Adhesive
Hover to view detail
Build Salt Wall

Himalayan Salt Bricks 8" x 4" x 2" Pack of 500 With 17 Salt Adhesive

This bundle pairs bulk salt material with an initial adhesive supply for a planned interior build. Twenty columns and twenty-five rows create a 160 × 100 inch face, while smaller panel groups offer another way to distribute the order. Record the approved layout by section and check adhesive consumption during the first stage. The stated upper coverage of the supplied units leaves little nominal allowance beyond five hundred bricks.
• SKU: BSW-SB-500-with-17-salt-adhesive
$2,750.00 $2,880.00 Save 5%
In stock • Ready to ship
American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Authentic Himalayan salt

Natural material with unique tone and veining

Project-focused support

Helpful guidance for homeowners and professionals

Secure checkout

Protected payment experience through Shopify

Bulk quantities available

For walls, spas, saunas and commercial projects

Contractor Installation Bundle

Pack of 500 Himalayan Pink Salt Bricks with 17 Salt Adhesives

Coordinate a five-hundred-brick project with seventeen supplied adhesives and a clear installation schedule.

Product Specifications

Quantity 500 salt bricks
Dimensions per Brick 8″ × 4″ × 2″
Weight per Brick ~5.5 lbs
Combined Brick Weight Approximately 2,750 lbs
Nominal Face Coverage 16,000 sq. in. / 111.11 sq. ft.
Example Layout 20 cols × 25 rows: 160″ wide × 100″ high
Material 100% Natural Himalayan rock salt
Origin Khewra Salt Mine, Pakistan
Color Shades Natural pink, coral, & amber variations
Included Adhesive 17 units (~14.62 lbs combined)
Total Bundle Weight ~2,764.62 lbs (excluding packaging)
Intended Use Dry, protected interior decorative features

Product Benefits

17 Included Adhesives

Directly incorporate seventeen dedicated salt adhesive cartridges into the commercial procurement schedule.

Large Rectangular Layout

The 160 × 100 inch layout creates a grand 13.3 × 8.3 ft elevation aligned with commercial wall heights.

Section-Based Install

Organize bricks into pre-labeled pallets that match the phased on-site construction sequence.

Early Consumption Check

Monitor substrate adhesive yield on early courses before proceeding to upper wall elevations.

Natural Tone Balance

Distribute rich coral, pink, and amber crystal faces smoothly across a master elevation.

Backlighting Provision

Plan multi-zone LED layouts and accessible service hatches before wall cavities are permanently closed.

Multiple Feature Option

Distribute material into ten 50-brick accents across multiple rooms when repeated design motifs are needed.

Component Load Rating

Factor both dead salt weight (~2,750 lbs) and adhesive weight (~14.6 lbs) into structural wall engineering.

Key Product Facts

500 Bricks 8″ × 4″ × 2″ each
111.11 sq. ft. Nominal broad-face area
2,764.62 lbs Bricks + adhesives weight
17 Adhesives Included bonding units

Product Overview

This bundle pairs bulk Himalayan salt material with an extensive adhesive package for a planned interior commercial installation. Twenty columns and twenty-five rows create a 160 × 100 inch broad-face elevation, while smaller multi-room groupings offer another way to distribute the package. Record the approved layout by section and verify adhesive yield during initial courses to confirm that substrate porosity aligns with project estimates.

Face Area Calculation: 500 × 8″ × 4″ ÷ 144 = 111.11 sq. ft. (assuming the 8″ × 4″ broad face is exposed). Layout dimensions exclude joints and framing; allow separately for cuts, waste margin, and perimeter trims.

Installation Materials: The 17 included adhesive units are formulated specifically for bonding salt blocks to clean, dry masonry or cement backer board. Confirm substrate suitability from current directions; framing, anchors, and LED electrical gear are planned separately.

Where Can You Use Himalayan Salt Bricks?

Hotel Large Feature

Coordinate a massive 160 × 100 inch illuminated rock salt backdrop within a flagship hospitality lobby.

Sauna Accent Portfolio

Assign pre-measured brick counts and adhesives to multiple dry sauna cabins with thermal clearances.

Wellness Center Build

Execute an expansive natural mineral elevation within a public commercial spa atrium or relaxation hall.

Salt-Room Phased Finish

Install full architectural sections across multi-room salt therapy centers with bulk material readiness.

Residential Statement Project

Construct a luxury floor-to-ceiling illuminated salt wall in a custom private spa, pool pavilion, or wine room.

Office Multi-Panel Series

Deploy ten matching 50-brick decorative features with dedicated adhesive across an entire corporate floor.

Note: These are alternative decorative applications for the 500-brick + 17 adhesive bundle, not six installations supplied by one pack. Sauna environments require approved structural framework, moisture protection, and thermal LED management.

Installation Planning Guide

1
Measure

Confirm the 160 × 100 inch perimeter, structural anchors, and electrical pathways before uncrating.

2
Dry Fit

Stage tiers in numbered sections on-site to preserve consistent mineral shade distribution across courses.

3
Prepare Base

Provide structural backing rated for ~2,765 lbs. Follow adhesive cartridge ventilation and cure rates.

4
Backlight

Test each lighting zone prior to setting final courses, and respect adhesive curing times before continuous use.

Care & Handling

Store the seventeen bonding units sealed in a climate-controlled area and stage palletized brick batches securely.

  • Keep all 500 bricks away from direct water contact, wet cleaning, and persistent dampness.
  • Remove dust from finished salt surfaces with a soft, dry cloth; avoid soaking or liquid cleaning agents.
  • Check the support structure and nearby moisture sources periodically for this large-scale interior feature.
  • Store the 17 adhesive units according to labels and observe application ventilation and curing requirements.

Frequently Asked Questions

How much nominal coverage do seventeen adhesive units offer?

At the listing's upper estimate of 30 bricks per tube, 17 units correspond to up to 510 bricks under standard bead application. Actual consumption depends on substrate roughness and joint thickness, so monitor usage during initial courses.

What is the combined component weight for this bundle?

The 500 salt bricks weigh approximately 2,750 lbs and the seventeen adhesive cartridges weigh ~14.62 lbs combined, totaling 2,764.62 lbs before freight palletizing and crating.

Does the bundle's brick area change because adhesive is included?

No. The 500 broad faces still provide approximately 111.11 sq. ft. of nominal face coverage before accounting for joints, perimeter reveal framing, and cuts.

How should I assign adhesive across several panels?

Allocate adhesive based on each wall's verified square footage and backing absorption rate rather than dividing cartridges evenly across rooms.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Shipping & Delivery

Orders are typically prepared for shipment within 0–1 business day.

  • U.S. delivery: Typically 3–5 business days after shipment.
  • Canada delivery: Typically 3–5 business days after shipment; customs processing may require additional time.
  • Tracking information is emailed once your order ships.
  • Large or bulk orders may ship via freight.
  • Orders containing multiple items may arrive in separate shipments.

Shipping rates and available delivery methods are calculated at checkout.

View our full Shipping Policy for complete details.

Returns & Refunds

Returns may be requested within 30 days of purchase.

To be eligible for a return, items must be unused, in their original condition and packaging, and accompanied by proof of purchase.

  • Return shipping costs are the customer's responsibility and are non-refundable.
  • Once your return is received and inspected, approved refunds are processed within 24–48 hours on our end. Your bank or payment provider may require additional processing time.
  • Defective or damaged items may be eligible for replacement.

For return assistance, contact sale@buildsaltwall.com.

View our full Refund & Return Policy for complete details.