Himalayan Pink Salt Tiles 8" x 4" x 1" - Pack of 150 With 5 Salt Adhesive
Pack of 150 Himalayan Pink Salt Tiles with 5 Salt Adhesives
Plan 150 salt tiles with five included adhesive tubes for a principal wall, matched panels, or sequenced work areas.
This Pack of 150 Himalayan pink salt tiles pairs 150 pieces measuring 8″ × 4″ × 1″ with 5 included salt-specific adhesive tubes. The tile faces total 4,800 square inches, or approximately 33.33 square feet, and listed components weigh about 439.30 lbs before packaging.
The bundle supports a mid-size commercial material quantity that can serve one primary installation or several coordinated rooms. One complete arrangement is the 15 × 10 panel at 120″ wide × 40″ high; another is the 10 × 15 panel at 80″ wide × 60″ high. Both are edge-to-edge dimensions that must be adjusted for actual joints, perimeter details, cuts, and site conditions.
Before bonding, distribute natural shades and translucency across a full dry layout, record the approved position of every tile, and divide the 5 adhesive tubes according to verified application rates. This sequence helps crews keep unopened material protected while three separate 50-tile sections or another approved work breakdown moves forward.
Complete Installation System Required: Confirm clean, dry backing for ~435 lbs of tile plus framing and lighting. Apply the 5-tube supply only as directions permit for compatible surfaces, preparation, ventilation, and full cure; obtain qualified structural guidance where required.
| Specification | Details |
|---|---|
| Bundle Format | 150 salt tiles + 5 salt adhesive tubes |
| Dimensions per Tile | 8″ × 4″ × 1″ |
| Weight per Tile | ~2.9 lbs |
| Combined Tile Weight | Approximately 435 lbs |
| Adhesive Weight | ~0.86 lb each / 4.30 lbs combined |
| Total Component Weight | ~439.30 lbs (excluding packaging) |
| Combined Face Coverage | 4,800 sq. in. / ~33.33 sq. ft. |
| 15 × 10 Landscape Footprint | 120″ wide × 40″ high |
| 10 × 15 Portrait Footprint | 80″ wide × 60″ high |
| 25 × 6 Linear Footprint | 200″ wide × 24″ high |
| Triple Panel Split | Three 10 × 5 panels (80″ wide × 20″ high each) |
| Tile Material | 100% Natural Himalayan pink rock salt |
| Color Variations | Natural pink, rose, coral, amber, & orange |
| Tile Surface | Hand-cut natural salt with individual character |
| Light Response | Semi-translucent when appropriately backlit |
| Adhesive Type | Salt-specific, clear-drying bonding adhesive |
| Intended Setting | Dry, protected indoor installations |
| Feature | Details |
|---|---|
| Tiles Count & Format | 150 Tiles (8″ × 4″ × 1″ each) |
| Adhesives Included | 5 Adhesives (~0.86 lb each) |
| Tile-Face Area | 33.33 sq. ft. calculated area |
| Total Load | 439.30 lbs Approx. combined components |
| Material | 100% Natural Himalayan pink rock salt |
| Adhesive Type | Salt-specific, clear-drying bonding adhesive |
| Light Response | Semi-translucent when appropriately backlit |
| Intended Use | Supported decorative features in dry interiors |
Assign the 150 tiles and 5 included adhesives to numbered work zones before installation begins.
Use a calculated 33.33 sq. ft. area for all 150 faces to establish a reliable starting quantity before waste allowances.
Arrange rose, coral, amber, and pale faces to establish a natural spa-inspired visual identity.
Rear-lighting systems designed for the 150-tile composition reveal varied translucency with accessible wiring paths.
Properly specified dry substrates, suitable bonding, complete cures, and moisture control protect the installation over time.
This bundle suits professionally managed work or experienced DIY builds when structural and electrical codes are met.
Extend a compatible salt wall after checking dimensions, finish, support capacity, and lighting of the existing assembly.
Knowing the 439.30 lb total load helps teams plan handling, staging, and qualified structural support reviews.
Note: These are alternative decorative applications for the 150-tile + 5 adhesive bundle. Sauna environments require approved structural framework, moisture protection, and thermal LED management.
Survey every planned zone for this 150-tile project, noting openings, corners, service routes, and tile cuts.
Build a floor-level mockup of each planned section and assign orientation codes to all 150 salt faces; divide into zones aligned with the 5 adhesive tubes.
Confirm clean, dry backing for ~435 lbs of tile. Apply 5 included salt adhesive tubes by zone per verified application rates.
Test lighting circuits in each 150-tile work zone before bonding, preserve service access, and wait for full cure.
Handle this 150-tile, 5-adhesive bundle as a zoned project inventory: protect salt faces from moisture and keep bonding containers closed until work areas are prepared.
- Record delivery condition of 150 tiles and 5 adhesive tubes before distributing materials.
- Store all 5 bonding containers according to labels, with lids or seals intact until application.
- Keep the complete 150-piece salt inventory away from direct water, wet cleaning, and plumbing leaks.
- Move 150-tile labeled groups on stable carts or pallets suitable for assigned installation phases.
- Open only the portion of the 5-adhesive supply allocated to a ready zone, observing working time and ventilation instructions.
- After 150 tiles are installed, remove loose surface dust with a clean, soft, dry cloth without saturating faces or joints.
- Schedule periodic checks of supports, visible bonds, lighting access, and moisture sources for the finished installation.
How many tiles and adhesives are supplied in the 150-tile bundle?
The product combines 150 Himalayan pink salt tiles measuring 8″ × 4″ × 1″ with 5 salt-specific adhesive tubes weighing approximately 0.86 lb each.
What is the calculated component weight for 150 tiles and 5 adhesives?
Tiles account for about 435 lbs and adhesives add roughly 4.30 lbs, totaling ~439.30 lbs before packaging.
How should 5 adhesive tubes be assigned across a 150-tile project?
Allocate the 5 tubes by verified coverage rate, substrate, and work zone; keep later-stage containers sealed until their areas are ready.
Which full-field layout is listed for this 150-tile adhesive bundle?
A 15 × 10 panel uses all 150 tiles in an edge-to-edge field measuring 120″ wide × 40″ high; adjust for actual joints, cuts, and perimeter details.
Shipping & Delivery
Orders are typically prepared for shipment within 0–1 business day.
- U.S. delivery: Typically 3–5 business days after shipment.
- Canada delivery: Typically 3–5 business days after shipment; customs processing may require additional time.
- Tracking information is emailed once your order ships.
- Large or bulk orders may ship via freight.
- Orders containing multiple items may arrive in separate shipments.
Shipping rates and available delivery methods are calculated at checkout.
Returns & Refunds
Eligible returns are accepted within 15 calendar days after delivery.
To be eligible for a return, items must be unused, in their original condition and packaging, and accompanied by proof of purchase.
- Return shipping costs are the customer's responsibility and are non-refundable.
- After your return arrives, we will inspect it and email you the approval decision. Once we approve your refund, you should receive the amount within 3–5 days. This period starts on the refund approval date and does not include return transit or inspection.
- Refunds are issued to the original payment method, except for eligible gift returns described below.
- If an accepted return is incomplete or has damage not caused by our error or an original delivery defect, a partial refund may apply. We will explain the reason and amount of any adjustment. Late returns accepted as an exception may also qualify for a partial refund. These provisions do not limit mandatory customer rights.
- If you have not received your refund within 5 days of approval, contact us at
- Defective or damaged items may be eligible for replacement.
For return assistance, contact sale@buildsaltwall.com.