Pack_of_30_salt_tiles_8x4x1_
Hover to view detail
Build Salt Wall

Himalayan Pink Salt Tiles – Pack of 30 With Salt Adhesive

This Pack of 30 Himalayan pink salt tiles with adhesive combines a larger quantity of natural wall material with the specified bonding component in one order. Each tile measures 8" × 4" × 1", and the thirty faces total 960 square inches, or approximately 6.67 square feet.
• SKU: BSW-ST-30 With 1 Salt Adhesive
$185.00 $220.00 Save 16%
In stock • Ready to ship
American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Authentic Himalayan salt

Natural material with unique tone and veining

Project-focused support

Helpful guidance for homeowners and professionals

Secure checkout

Protected payment experience through Shopify

Bulk quantities available

For walls, spas, saunas and commercial projects

Large Tile Feature Bundle

Pack of 30 Himalayan Pink Salt Tiles with 1 Salt Adhesive

Plan a larger protected interior feature with thirty natural salt tiles and one included 0.86 lb adhesive formulated for bonding salt material.

Product Specifications

Bundle Format 30 salt tiles + 1 salt adhesive
Dimensions per Tile 8″ × 4″ × 1″
Weight per Tile ~2.9 lbs
Combined Tile Weight Approximately 87 lbs
Adhesive Weight Approximately 0.86 lbs
Total Component Weight ~87.86 lbs (excluding packaging)
Combined Face Coverage 960 sq. in. / ~6.67 sq. ft.
6 × 5 Panel Footprint 48″ wide × 20″ high
5 × 6 Panel Footprint 40″ wide × 24″ high
10 × 3 Linear Footprint 80″ wide × 12″ high
3 × 10 Column Footprint 24″ wide × 40″ high
Tile Material 100% Natural Himalayan pink salt
Composition Approximately 98%+ Sodium Chloride (NaCl)
Origin Khewra Salt Mine, Punjab, Pakistan
Color Variations Natural pink, rose, coral, amber, & orange
Tile Surface Hand-cut with a dense natural surface
Light Response Semi-translucent when appropriately backlit
Adhesive Type Salt-specific, clear-drying bonding adhesive
Intended Setting Dry, protected indoor installations

Product Benefits

Thirty Tiles with Adhesive

Receive the full tile quantity and one specified adhesive in the same bundle for a coordinated project start.

Coverage for Larger Panels

Approximately 6.67 sq. ft. of combined face area supports a noticeable interior feature rather than a small test section.

Multiple Grid Shapes

Use every piece in wide, balanced, vertical, or column-style configurations selected for available wall proportions.

Natural Variation at Scale

Thirty individual faces provide more freedom to sequence lighter tones, deeper amber areas, and veining.

Clear Joint Support

The included salt adhesive helps correctly assembled joints maintain a cleaner visual finish after curing.

Broader Backlighting Layout

Design several lighting zones behind the semi-translucent grid to manage illumination across width and height.

Known Installation Load

An 87 lb tile total gives contractors and capable DIY planners a defined weight for substrate and framing decisions.

Adaptable New-Build

Create a standalone display or expand a dimensionally compatible installation after inspecting existing support.

Key Product Facts

30 Tiles 8″ × 4″ × 1″ each
1 Adhesive Approximately 0.86 lb
6.67 sq. ft. Tile-face coverage
87.86 lbs Approx. combined components

Product Overview

This Pack of 30 Himalayan pink salt tiles with adhesive combines a larger quantity of natural wall material with the specified bonding component in one order. Each tile measures 8″ × 4″ × 1″, and the thirty faces total 960 square inches, or approximately 6.67 square feet.

Choose a 48″ × 20″ six-by-five rectangle or a 40″ × 24″ five-by-six panel for balanced proportions. The same quantity also supports an 80″ × 12″ ten-by-three horizontal sweep or a 24″ × 40″ three-by-ten column when the project needs a wider or taller presentation.

The included 0.86 lb adhesive is formulated for salt-tile bonding and dries clear when used according to directions. Because tiles alone weigh approximately 87 lbs, the wall, backing, frame, and attachment plan must be evaluated for complete installed load before application starts.

Finalize Positions Before Bonding: Lay out the complete pattern, review color and light transmission, confirm joint widths, and label every piece. This preparation reduces disruptive changes after adhesive has been opened and applied.

Where Can You Use Himalayan Salt Tiles?

Boutique Spa Backdrop

Build a 48″ × 20″ mineral-texture panel in a protected service room or guest-facing interior using bundled components.

Wellness Studio Welcome Wall

Use a 40″ × 24″ configuration to create a defined feature near a check-in desk, waiting zone, or studio entrance.

Resort Lounge Horizontal Sweep

Arrange ten tiles across and three high for an 80″ × 12″ band behind protected seating or along an interior corridor.

Dry-Sauna Vertical Feature

Plan a 24″ × 40″ column within a professionally specified dry-sauna system accounting for heat, support, and lighting.

Salt-Room Wrapped Corner

Distribute eighteen tiles on the primary wall and twelve on the return after confirming alignment and structural backing.

Home-Office Large DIY Panel

Use the tile-and-adhesive bundle for a carefully measured wall insert behind a desk, reading area, or display cabinet.

Note: These are alternative decorative applications for the 30-tile + adhesive bundle. Sauna environments require approved structural framework, moisture protection, and thermal LED management.

Installation Planning Guide

1
Measure

Mark the grid boundary and separately allow for joints, perimeter trim, lighting depth, and future access.

2
Dry Fit

Arrange all thirty tiles in numbered rows, rotate individual faces as needed, and photograph the approved sequence.

3
Prepare Base

Confirm clean, dry support for 87 lbs plus framing. Apply included 0.86 lb salt adhesive at directed rate for tidy joints.

4
Backlight

Install and test enclosed lighting across the cavity, retain service access, and wait for full stated cure before powering on.

Care & Maintenance

Manage tiles and adhesive separately until installation: protect mineral pieces from moisture and keep bonding product sealed until surfaces are ready.

  • Keep thirty tiles in a stable indoor storage area with dry surrounding conditions.
  • Protect material from direct water, wet cleaning, exterior weather, and potential leak paths.
  • Open adhesive only after support, tools, ventilation, and numbered layout are prepared.
  • Carry each tile independently and avoid impacts against its face, corners, or neighboring pieces.
  • Observe adhesive manufacturer's application, cleanup, and curing instructions throughout work.
  • Clean installed salt surface with a soft, dry cloth and inspect joints without saturating them.
  • Keep optional electrical equipment properly enclosed and appropriate for installation environment.

Frequently Asked Questions

What are the exact bundle quantity and approximate weight?

The bundle supplies thirty 8″ × 4″ × 1″ salt tiles and one 0.86 lb adhesive. Tiles weigh approximately 87 lbs combined, bringing components to about 87.86 lbs before packaging.

How much visible surface can this bundle create?

All thirty tile faces provide approximately 6.67 square feet. This number excludes joint spacing, borders, cuts, lighting cavities, and open area within the design.

What should I confirm before using the included adhesive?

Check that substrate is clean, dry, level, compatible, and rated for completed load. Then follow adhesive label for application rate, ventilation, cleanup, and curing.

Should a thirty-tile installation be professionally planned?

Professional review is advisable whenever uncertain about supporting 87 lbs of tile, building a frame, installing electrical lighting, or working in a sauna or commercial environment.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
V
Vadim Dernovoy
Excellent Quality & Easy to Install

Beautiful salt tiles, consistent size, and the free adhesive made setup simple. Great value!

Shipping & Delivery

Orders are typically prepared for shipment within 0–1 business day.

  • U.S. delivery: Typically 3–5 business days after shipment.
  • Canada delivery: Typically 3–5 business days after shipment; customs processing may require additional time.
  • Tracking information is emailed once your order ships.
  • Large or bulk orders may ship via freight.
  • Orders containing multiple items may arrive in separate shipments.

Shipping rates and available delivery methods are calculated at checkout.

View our full Shipping Policy for complete details.

Returns & Refunds

Returns may be requested within 30 days of purchase.

To be eligible for a return, items must be unused, in their original condition and packaging, and accompanied by proof of purchase.

  • Return shipping costs are the customer's responsibility and are non-refundable.
  • Once your return is received and inspected, approved refunds are processed within 24–48 hours on our end. Your bank or payment provider may require additional processing time.
  • Defective or damaged items may be eligible for replacement.

For return assistance, contact sale@buildsaltwall.com.

View our full Refund & Return Policy for complete details.