Backlit Himalayan Salt Wall Kits — Complete Panel Packs from 4to 50 sq ft

Most people planning a salt wall end up quoting from four different suppliers before they've laid a single brick — salt from one, adhesive from another, LED strip from a third, and no one able to tell them how much of each they need. These kits exist so that doesn't happen. Pick your wall dimensions and everything ships together: the correct brick count, the right quantity of salt-specific adhesive, and a layout plan. Sizes range from a 4 sq ft alcove feature to a50 sq ft commercial wall.
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

What a salt wall is actually made of

Four things have to work together, and getting any one of them wrong shows up later:

1. The salt face. Salt bricks (2") for depth and durability, or tiles (1") for lighter decorative work. This is what people see.

2. Salt-bonding adhesive. This is the part people get wrong most often. Standard construction adhesive is opaque or tinted, and on a backlit translucent wall it shows as dark seams around every joint. It also isn't formulated for the way salt behaves against moisture. You need adhesive made for salt.

3. UV LED backlighting. Strip lighting behind the salt, mounted with a diffuser and an air gap. Direct LED contact produces visible hot spots; a gap and a diffuser produce an even glow.
4. A moisture-resistant backing frame. Wood or metal, sealed. This is what the salt bonds to, and it's what protects the surrounding structure over the long term.

Why kits instead of parts

The most common failure in a self-sourced salt wall isn't the salt — it's ordering 15% too few bricks and discovering it mid-install, or using a general-purpose adhesive made for salt because that's what the hardware store had. Kits remove both problems. The brick count is calculated for the stated area with allowance for cuts, and the adhesive is matched to the quantity.

Choosing a size

Wall area Typical use
4–9 sq ft Alcove, niche, reception feature, headboard panel
12–20 sq ft Treatment room accent wall, home sauna wall
20–25 sq ft Full residential feature wall, small spa room
25–50 sq ft Commercial spa, salt room, hotel lobby

Not sure? Measure the length and height of the wall in feet and multiply. Send us the number and we'll confirm the right kit.

Custom Dimensions

 If your wall doesn't match a standard kit — sloped ceilings, wraparound corners, cutouts for benches or fixtures — we'll build a custom pack. Send dimensions and a photo, and we'll return a component list and a quote.

Call (212) 347-0281 or email sale@buildsaltwall.com.